East
Coast Diver LLC is an "authorized service center" for all the brands we
carry (Promate and Oxycheq)! We have three on
staff service techs, more great brands are on the way! ECD is confident in the
high quality of service we provide. All service is guaranteed free from defect
in workmanship for one full year from service!
We also do "out of warranty" repair and service on
Oceanic, Zeagle, Diverite, Salvo, TDL, Aeris, Mares,
Genesis, and Sherwood
Regulators or just about any brand BCD.
Regulator Service & Flow Testing
-
Annual Service: First Stage, Second Stage, Octo, &
Console $45.00 plus parts
-
Or $18.00 per stage plus parts
-
Flow/Bench Test Only $15.00. (Note: this is
already included with any regulator we service)
-
* Integrated Octo/BCD Inflator Service, $15.00 plus
parts. (We do not flow test these)
Attention Promate and Oxycheq Regulator Owners,
ECD will extend your one year manufacturer's warranty one full year (ECD
Warranty) following your annual service on your First Stage.
What does "out of warranty" mean?
ECD will give your Oceanic, Zeagle, Diverite, Salvo, TDL, Aeris, Mares,
Genesis, or Sherwood regulator the
same care and great repair warranty as the lines we are factory authorized to
sell and service; we just cannot maintain your factory warranty and are not
"authorized" dealers or repair facilities for these lines. We service this
equipment with original factory service kits and tune them to
manufacturer's specifications just as we would any regulator we
service!
(Your annual service must be completed within 30 days of your purchase date, before or after is
fine to qualify for the extended warranty. Warranty void
in instances of abuse.)
BCD Service
Let us thoroughly clean, inspect, and replace any worn or
damaged parts on this critical piece of equipment for you, this service is
highly recommended annually.
Cylinder Visual Inspections
Cylinder Hydrostatic Testing
Department of Transportation regulations state that SCUBA
cylinders must be hydrostatically tested every five years. ECD can take care
of this service for you.
Cylinder Valve "Rebuild"
We stock parts for THERMO and Genesis valves and will special
order any other brands available. Computer Battery
Replacement
Oxygen Cleaning Service
Strict adherence to Compressed Gas Association (CGA)
recommendations concerning oxygen service is a must. These recommendations
establish that cylinders containing 23.5% oxygen content, or greater, shall be
cleaned and serviced in accordance with CGA pamphlet G-4.1 part 11.2.6. Most
dive shops won't even consider pre-mix on a cylinder which has not been
cleaned for oxygen service. As gas blending is a common method by which EANx
cylinders are filled, the oxygen content in any EANx cylinder may reasonably
be expected to, at some time, exceed the 23.5% threshold and in the case of
partial pressure blending are exposed to 100% O2; therefore, all EANx cylinders must be cleaned
for oxygen service. I have been certified through Technical Diving
International to perform both visual inspections and oxygen cleaning services.
(doubles will incur additional charges)
The considerations for cylinders used for oxygen service are
lengthy. If you have any questions, don't hesitate to call.
Here are some good links to info from Luxfer and Catalina.
Although they refer to aluminum cylinders, the consideration on steel is no
different.
Luxfer
Catalina
|
